ST-H100 UHF Portable Bluetooth Reader
The UHF portable Reader ST-H100 is widely used in label inventory application scenarios such as jewelry inventory, parts inventory, warehouse management, shelf management, etc.
ST-H100 UHF Portable Bluetooth Reader |
Model |
ST-H100 |
Frequency |
902-928MHZ( US) /865-868MHZ( EU) |
Protocol |
ISO18000-6C(EPC GEN2) |
RF output |
0-20dbm(adjustable) |
Reading speed |
>30pcs/s |
Reading distance |
0-50cm |
Bluetooth communication |
BLE 5.3 |
Wired communication |
Type-C enables online charging and serial port upgrades |
Card reading prompts |
LED flashes |
Button |
Button switch machine |
Shell material |
ABS+Silica gel |
Operating temperature |
-10ºC~50ºC |
Storage temperature |
-30ºC~70ºC |
Battery |
lithium battery( 3.7V-1000mAh) |
Operating current |
<=145mA |
Standby current |
<=100uA |
Length of work |
Working continuously for over 6 hours |
Standby time |
More than 1 year |
Charging time |
1hour |
Size |
76( length)*37(width)*39( height)mm |
Weight |
71g |
Parameters
Size:76*37*39mm

On/off and charging: Press and hold the button for three seconds to turn on and off and charge through the Type-C port
LED working indicator: Four battery indicator lights and one card reading indicator light.
The left side lights up green when the reader is turned on, and the right side light flashes when the label being read.
Retractable back clip fixation: can be clipped on the back of the mobile phone for use
Two working mode
Serial Net mode :Open the software to search and connect to Bluetooth to set parameters, receive tag data, and write tag data.
HID mode:The mobile phone can directly search and connect to Bluetooth, and data
can be received at the cursor, such as notepad and input box. Note: Factory default Serial Net mode.
After setting to HID mode on the mobile phone software, switching to Serial Net
mode requires connecting to the computer software settings. Come with mobile phone software and computer software

Application scenario
